Prodcts

When purchasing fishing line, actually test its pulling force. The method is to put sand in a cloth bag, tie the line to hoist it, and the weight of the sand when the line is stretched is the actual tension of the line, and it can be judged whether it is qualified or not by comparing it with the calibration standard. In addition, knead the thread into a ball, squeeze it with both hands, and release it to see if it can automatically recover in an instant. At the same time, it is also necessary to observe whether there are any injuries or looseness. If it is a colored flower thread, twist it with your hand to see if the color fades. After inspection, as long as the signs of defective products are found, do not buy them.
3. Fishing hook
The basic requirements of a fishing hook are that the hook tip is sharp, the hook is strong, the hook is tough and elastic, the hook cap is suitable for hooking, the hook is moderately curved, and the angle between the barb and the hook body should be between 25°-30°.
According to the purpose of use, it can be divided into two categories: productive fishing hooks and recreational fishing hooks. The former has thick hooks and large hooks; the latter has thin hooks and small hooks. The fishing hook consists of three parts: the hook handle, the hook bottom and the hook tail.
Four, winding wheel
The reel is matched with the sea rod, which is a powerful tool for deep-water long-distance fishing, and is also an important symbol for the fishing tackle to reach a new level. Therefore, more and more fishermen pay attention to it.
The more representative ones are as follows:
(1) Electric reel
It is characterized by flexible operation, large fishing force, and digital display. After the fish is hooked, the power supply can be automatically turned on, thereby driving the spool to automatically rotate and take up the line. But it is expensive, bulky and inconvenient to carry.
(2) Spinning reel
It is one of the most common applications. The operation is simple, the casting rod resistance is small, the take-up speed is also relatively fast, the quality is good and the price is low, but the structure is more complicated.
(3) Sealed reel
Its working principle is the same as that of spinning reels. A light metal casing is inlaid on the top of the spool, leaving a wire outlet. The characteristics are that the line is not chaotic, and the sand is not easy to enter, which is beneficial to protect the fishing line and the spool.
(4) Disc type reel
Shaped like a round horseshoe table. The advantages are sturdy and durable, high fishing power, light weight, and no "tug-of-war" phenomenon with fish. However, the production is rough, the resistance of the casting rod is large, and it is not as flexible as the spinning wheel (this wheel is made in Russia and is available in the trade market of the border ports of Manzhouli and Suifenhe).